dmesg - Desktop PC
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-18-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 (Ubuntu 3.5.0-18.29-generic 3.5.7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000097bff] usable
BIOS-e820: [mem 0x0000000000097c00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cff70fff] usable
BIOS-e820: [mem 0x00000000cffd0000-0x00000000cffddfff] ACPI data
BIOS-e820: [mem 0x00000000cffde000-0x00000000cffdffff] ACPI NVS
BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
DMI present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./YESTON A785G LANPARTY V1.1, BIOS 080015 11/05/2009
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcff71 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000091000] 91000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xcff70fff]
[mem 0x00000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcff70fff] page 4k
kernel direct mapping tables up to 0xcff70fff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x12fffffff]
[mem 0x100000000-0x12fffffff] page 2M
kernel direct mapping tables up to 0x12fffffff @ [mem 0xcff6f000-0xcff70fff]
RAMDISK: [mem 0x362e2000-0x37168fff]
ACPI: RSDP 00000000000f94e0 00014 (v00 ACPIAM)
ACPI: RSDT 00000000cffd0000 00038 (v01 110509 RSDT1104 20091105 MSFT 00000097)
ACPI: FACP 00000000cffd0200 00084 (v01 110509 FACP1104 20091105 MSFT 00000097)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579)
ACPI: DSDT 00000000cffd0440 09ECE (v01 1AEIK 1AEIK000 00000000 INTL 20051117)
ACPI: FACS 00000000cffde000 00040
ACPI: APIC 00000000cffd0390 0006C (v01 110509 APIC1104 20091105 MSFT 00000097)
ACPI: MCFG 00000000cffd0400 0003C (v01 110509 OEMMCFG 20091105 MSFT 00000097)
ACPI: OEMB 00000000cffde040 00073 (v01 110509 OEMB1104 20091105 MSFT 00000097)
ACPI: HPET 00000000cffda310 00038 (v01 110509 OEMHPET 20091105 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
Initmem setup node 0 [mem 0x00000000-0x12fffffff]
NODE_DATA [mem 0x12fffc000-0x12fffffff]
[ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x12fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x00096fff]
node 0: [mem 0x00100000-0xcff70fff]
node 0: [mem 0x100000000-0x12fffffff]
On node 0 totalpages: 1048312
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3905 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 831409 pages, LIFO batch:31
Normal zone: 3072 pages used for memmap
Normal zone: 193536 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 0000000000097000 - 0000000000098000
PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
PM: Registered nosave memory: 00000000cff71000 - 00000000cffd0000
PM: Registered nosave memory: 00000000cffd0000 - 00000000cffde000
PM: Registered nosave memory: 00000000cffde000 - 00000000cffe0000
PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000
PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
e820: [mem 0xd0000000-0xff6fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83584 r8192 d22912 u524288
pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028850
Policy zone: Normal
PCIe ASPM is forcibly enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Node 0: aperture @ fdfc000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
Memory: 3964952k/4980736k available (6717k kernel code, 787488k absent, 228296k reserved, 6453k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3149.979 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6299.95 BogoMIPS (lpj=12599916)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
using AMD E400 aware idle routine
ACPI: Core revision 20120320
ftrace: allocating 25135 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) II X4 630 Processor stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (25199.83 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcffde000-0xcffdffff] (8192 bytes)
dummy:
RTC time: 2:01:18, date: 10/28/12
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffefffff]
TOM2: 0000000130000000 aka 4864M
bus: [00, 07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x130000000-0xfcffffffff]
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 4 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
pci 0000:00:11.0: reg 24: [mem 0xfe8ffc00-0xfe8fffff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfe8fe000-0xfe8fefff]
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 10: [mem 0xfe8fd000-0xfe8fdfff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfe8ff800-0xfe8ff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfe8fc000-0xfe8fcfff]
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 10: [mem 0xfe8f7000-0xfe8f7fff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfe8ff400-0xfe8ff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfe8f0000-0xfe8f3fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfe8f6000-0xfe8f6fff]
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [1002:68d8] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe9e0000-0xfe9fffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
pci 0000:01:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfe9bc000-0xfe9bffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1814:3090] type 00 class 0x028000
pci 0000:02:00.0: reg 10: [mem 0xfeaf0000-0xfeafffff]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
pci 0000:03:00.0: reg 30: [mem 0xfebe0000-0xfebfffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
pci 0000:00:05.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 *10 11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11 12) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00097c00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcff71000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xd0000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x03f8-0x03ff]
pnp 00:06: [irq 4]
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [mem 0xfed00000-0xfed003ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [mem 0xfec00000-0xfec00fff]
pnp 00:08: [mem 0xfee00000-0xfee00fff]
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0022-0x003f]
pnp 00:09: [io 0x0062-0x0063]
pnp 00:09: [io 0x0065-0x006f]
pnp 00:09: [io 0x0072-0x007f]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x00a2-0x00bf]
pnp 00:09: [io 0x00b1]
pnp 00:09: [io 0x00e0-0x00ef]
pnp 00:09: [io 0x04d0-0x04d1]
pnp 00:09: [io 0x040b]
pnp 00:09: [io 0x04d6]
pnp 00:09: [io 0x0c00-0x0c01]
pnp 00:09: [io 0x0c14]
pnp 00:09: [io 0x0c50-0x0c51]
pnp 00:09: [io 0x0c52]
pnp 00:09: [io 0x0c6c]
pnp 00:09: [io 0x0c6f]
pnp 00:09: [io 0x0cd0-0x0cd1]
pnp 00:09: [io 0x0cd2-0x0cd3]
pnp 00:09: [io 0x0cd4-0x0cd5]
pnp 00:09: [io 0x0cd6-0x0cd7]
pnp 00:09: [io 0x0cd8-0x0cdf]
pnp 00:09: [io 0x0800-0x089f]
pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:09: [io 0x0b00-0x0b0f]
pnp 00:09: [io 0x0b20-0x0b3f]
pnp 00:09: [io 0x0900-0x090f]
pnp 00:09: [io 0x0910-0x091f]
pnp 00:09: [io 0xfe00-0xfefe]
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
pnp 00:09: [mem 0xffb80000-0xffbfffff]
pnp 00:09: [mem 0xfec10000-0xfec1001f]
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: [io 0x040b] has been reserved
system 00:09: [io 0x04d6] has been reserved
system 00:09: [io 0x0c00-0x0c01] has been reserved
system 00:09: [io 0x0c14] has been reserved
system 00:09: [io 0x0c50-0x0c51] has been reserved
system 00:09: [io 0x0c52] has been reserved
system 00:09: [io 0x0c6c] has been reserved
system 00:09: [io 0x0c6f] has been reserved
system 00:09: [io 0x0cd0-0x0cd1] has been reserved
system 00:09: [io 0x0cd2-0x0cd3] has been reserved
system 00:09: [io 0x0cd4-0x0cd5] has been reserved
system 00:09: [io 0x0cd6-0x0cd7] has been reserved
system 00:09: [io 0x0cd8-0x0cdf] has been reserved
system 00:09: [io 0x0800-0x089f] has been reserved
system 00:09: [io 0x0b00-0x0b0f] has been reserved
system 00:09: [io 0x0b20-0x0b3f] has been reserved
system 00:09: [io 0x0900-0x090f] has been reserved
system 00:09: [io 0x0910-0x091f] has been reserved
system 00:09: [io 0xfe00-0xfefe] has been reserved
system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0a: [io 0x0a00-0x0a0f]
pnp 00:0a: [io 0x0228-0x0237]
system 00:0a: [io 0x0a00-0x0a0f] has been reserved
system 00:0a: [io 0x0228-0x0237] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xe0000000-0xefffffff]
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x000c0000-0x000cffff]
pnp 00:0c: [mem 0x000e0000-0x000fffff]
pnp 00:0c: [mem 0x00100000-0xcfffffff]
pnp 00:0c: [mem 0xfec00000-0xffffffff]
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
pci 0000:00:05.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
Freeing initrd memory: 14876k freed
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1351389678.576:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 7901
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
pcieport 0000:00:05.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Invalid active0 threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (41 C)
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22
pata_acpi 0000:00:14.1: setting latency timer to 64
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe8ff800
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-18-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe8ff400
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-18-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe8fe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.0-18-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe8fd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.0-18-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.5.0-18-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe8f7000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.5.0-18-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe8f6000
ata3: SATA link down (SStatus 0 SControl 300)
usb 1-6: new high-speed USB device number 2 using ehci_hcd
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.5.0-18-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 0:300:6
rtc_cmos 00:03: setting system clock to 2012-10-28 02:01:19 UTC (1351389679)
powernow-k8: Found 1 AMD Athlon(tm) II X4 630 Processor (4 cpu cores) (version 2.20.00)
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: ATA-8: WDC WD10EACS-00C7B0, 01.01B01, max UDMA/133
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD10EACS-00C 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
ata4.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 < sdc5 sdc6 >
sd 3:0:0:0: [sdc] Attached SCSI disk
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1464k freed
Freeing unused kernel memory: 1120k freed
udevd[107]: starting version 175
usb 1-6: New USB device found, idVendor=046d, idProduct=0824
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 1-6: SerialNumber: B7E0BBA0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: irq 43 for MSI/MSI-X
r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc90000660000, 00:e0:4c:cb:a9:2f, XID 081000c0 IRQ 43
r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
usb 2-4: new high-speed USB device number 3 using ehci_hcd
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 2-4: New USB device found, idVendor=1a40, idProduct=0101
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB 2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
Refined TSC clocksource calibration: 3150.074 MHz.
Switching to clocksource tsc
usb 5-3: new low-speed USB device number 2 using ohci_hcd
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 5-3: New USB device found, idVendor=1bcf, idProduct=0002
usb 5-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 5-3: Product: USB Optical Wheel Mouse
Adding 7810044k swap on /dev/sda6. Priority:-1 extents:1 across:7810044k SS
Adding 9765884k swap on /dev/sdc6. Priority:-2 extents:1 across:9765884k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
usb 2-4.4: new full-speed USB device number 4 using ehci_hcd
udevd[394]: starting version 175
lp: driver loaded but no devices found
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
wmi: Mapper loaded
usb 2-4.4: New USB device found, idVendor=24ae, idProduct=2000
usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4.4: Product: RAPOO 2.4G Wireless Device
usb 2-4.4: Manufacturer: RAPOO
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (REDWOOD 0x1002:0x68D8 0x174B:0xE152).
[drm] register mmio base: 0xFE9E0000
[drm] register mmio size: 131072
ATOM BIOS:
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 2024646 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 44 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading REDWOOD Microcode
type=1400 audit(1351389680.877:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=547 comm="apparmor_parser"
type=1400 audit(1351389680.877:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=547 comm="apparmor_parser"
type=1400 audit(1351389680.881:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=547 comm="apparmor_parser"
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
MCE: In-kernel MCE decoding enabled.
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
sp5100_tco: mmio address 0xfec000f0 already in use
EDAC MC: Ver: 2.1.0
ppdev: user-space parallel port driver
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2800pci-phy0::radio
Registered led device: rt2800pci-phy0::assoc
Registered led device: rt2800pci-phy0::quality
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
type=1400 audit(1351389680.933:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=614 comm="apparmor_parser"
type=1400 audit(1351389680.933:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=614 comm="apparmor_parser"
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
microcode: CPU0: patch_level=0x01000086
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device (046d:0824)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: UVC Camera (046d:0824) as /devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6:1.0/input/input2
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: CPU1: patch_level=0x01000086
input: USB Optical Wheel Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input3
hid-generic 0003:1BCF:0002.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Wheel Mouse] on usb-0000:00:13.0-3/input0
input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.4/2-4.4:1.0/input/input4
hid-generic 0003:24AE:2000.0002: input,hidraw1: USB HID v1.01 Keyboard [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:13.2-4.4/input0
input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.4/2-4.4:1.1/input/input5
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: CPU2: patch_level=0x01000086
hid-generic 0003:24AE:2000.0003: input,hiddev0,hidraw2: USB HID v1.01 Mouse [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:13.2-4.4/input1
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: CPU3: patch_level=0x01000086
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801263e7c00
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD5
[drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
init: failsafe main process (739) killed by TERM signal
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12
type=1400 audit(1351389681.241:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=913 comm="apparmor_parser"
type=1400 audit(1351389681.241:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=910 comm="apparmor_parser"
type=1400 audit(1351389681.241:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=910 comm="apparmor_parser"
type=1400 audit(1351389681.241:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=911 comm="apparmor_parser"
usbcore: registered new interface driver snd-usb-audio
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0: eth0: link down
r8169 0000:03:00.0: eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Bridge firewalling registered
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
r8169 0000:03:00.0: eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 63 callbacks suppressed
type=1701 audit(1351389698.377:32): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=2791 comm="chrome" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7f4dc1f53ed9 code=0x50000
type=1701 audit(1351389739.225:33): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=3849 comm="chrome" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7fc72794ded9 code=0x50000